Inertia Absorber

When using longer grippers that rotate, you often see that the end of the gripper wobbles after. That does not have to be a problem, because the Pick and Place position remains accurate. Until now, this movement has been reduced with software programming. That requires a lot of work and time and therefore money. Codian Robotics now offers a mechanical solution. We can confirm that the Inertia Absorber is working properly. We have tested it extensively.

We recommend ordering an Inertia Absorber with your robot if you are using a Rotation axis R200 or R300 and the Inertia of the D4-S020 is larger than 0.01 Kgm ^ 2. With the D4-S040 robot, you can order the robot with an Inertia from 0.1 Kgm ^ 2.

If you have any questions about the possibilities of the Inertia Absorber, is happy to help you!

« Back to the summary

Dear valued customer,

Over the years, to ensure stability for your planning and pricing, we have absorbed most material cost fluctuations. With the current scale of increases in the raw materials, packaging, and logistics, however, we are unable to offset the cost burden through efficiency gains alone. We therefore will increase the list prices of our robots as per 1st of June 2022.

Current offers will of course remain valid for the duration stated on the offer.

Please contact your account manager within Codian Robotics to inform what the alteration to the list prices will mean for you.

Kindest Regards,
Codian Robotics BV